- steel toe-cap resists impacts of 200 joules with a
clearance of 14mm (tested size 42), and crushing forces up to
1,500 kg. This is not a protection to the rest of the foot, where
impacts often happen.
other safety features
- anti static: resistance when new between 0.1 mega
ohms and a thousand mega ohms, although this varies with wetness
and wear.
- energy absorption in the heel described as above 20
joules on standard tests.
- water resistant upper with no penetration during an
hour of the standard test
- penetration resistant over 1,100 newtons to the mid sole
on standard tests.
- anti-slip requirements to Italian standard UNI 8615/1
|
not to fire fighting
standards
not with heat resistant sole to 300 degrees for
1 minute - a Lorica slip-on boot without much protection but
with a heat-resistant sole may be available on order for this.
not extra-insulated with temperature decrease less
than 10 degrees over a fixed period at minus 20 degrees centigrade
not with foot arch protection, resisting impacts
over 100 joules, although the sole is strong.
not with water penetration area less than 3 cm
squared
not with Kevlar re-enforcement for Kansas
please
check the instruction leaflet on delivery for any mistakes here. |